[bugfix] ...

picom/config/launch.sh

@@ -4,4 +4,5 @@ DIR=$(readlink -f $(dirname $0))
 
 killall -q picom
 while pgrep -x picom >/dev/null; do sleep 1; done
+echo $DIR/picom.conf
 picom -b --config $DIR/picom.conf

picom/config/picom.conf

@@ -1,231 +1,396 @@
-# Thank you code_nomad: http://9m.no/ꪯ鵞
-# and Arch Wiki contributors: https://wiki.archlinux.org/index.php/Compton
-
 #################################
-#
-# Backend
-#
+#             Shadows           #
 #################################
 
-# Backend to use: "xrender" or "glx".
-# GLX backend is typically much faster but depends on a sane driver.
-backend = "glx";
 
-#################################
+# Enabled client-side shadows on windows. Note desktop windows
+# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow,
+# unless explicitly requested using the wintypes option.
 #
-# GLX backend
+# shadow = false
+shadow = true;
+
+# The blur radius for shadows, in pixels. (defaults to 12)
+# shadow-radius = 12
+shadow-radius = 7;
+
+# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
+# shadow-opacity = .75
+
+# The left offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-x = -15
+shadow-offset-x = -7;
+
+# The top offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-y = -15
+shadow-offset-y = -7;
+
+# Red color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-red = 0
+
+# Green color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-green = 0
+
+# Blue color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-blue = 0
+
+# Hex string color value of shadow (#000000 - #FFFFFF, defaults to #000000). This option will override options set shadow-(red/green/blue)
+# shadow-color = "#000000"
+
+# Specify a list of conditions of windows that should have no shadow.
 #
-#################################
-
-glx-no-stencil = true;
-
-# GLX backend: Copy unmodified regions from front buffer instead of redrawing them all.
-# My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified,
-# but a 20% increase when only 1/4 is.
-# My tests on nouveau show terrible slowdown.
-glx-copy-from-front = false;
-
-# GLX backend: Use MESA_copy_sub_buffer to do partial screen update.
-# My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated.
-# May break VSync and is not available on some drivers.
-# Overrides --glx-copy-from-front.
-# glx-use-copysubbuffermesa = true;
-
-# GLX backend: Avoid rebinding pixmap on window damage.
-# Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe).
-# Recommended if it works.
-# glx-no-rebind-pixmap = true;
-
-# GLX backend: GLX buffer swap method we assume.
-# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).
-# undefined is the slowest and the safest, and the default value.
-# copy is fastest, but may fail on some drivers,
-# 2-6 are gradually slower but safer (6 is still faster than 0).
-# Usually, double buffer means 2, triple buffer means 3.
-# buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers.
-# Useless with --glx-use-copysubbuffermesa.
-# Partially breaks --resize-damage.
-# Defaults to undefined.
-#glx-swap-method = "undefined";
-
-#################################
+# examples:
+#   shadow-exclude = "n:e:Notification";
 #
-# Shadows
-#
-#################################
-
-# Enabled client-side shadows on windows.
-shadow = false;
-# The blur radius for shadows. (default 12)
-shadow-radius = 5;
-# The left offset for shadows. (default -15)
-shadow-offset-x = -5;
-# The top offset for shadows. (default -15)
-shadow-offset-y = -5;
-# The translucency for shadows. (default .75)
-shadow-opacity = 0.5;
-
-# Set if you want different colour shadows
-# shadow-red = 0.0;
-# shadow-green = 0.0;
-# shadow-blue = 0.0;
-
-# The shadow exclude options are helpful if you have shadows enabled. Due to the way picom draws its shadows, certain applications will have visual glitches
-# (most applications are fine, only apps that do weird things with xshapes or argb are affected).
-# This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher.
+# shadow-exclude = []
 shadow-exclude = [
-    "! name~=''",
-    "name = 'Notification'",
-    "name = 'Plank'",
-    "name = 'Docky'",
-    "name = 'Kupfer'",
-    "name = 'xfce4-notifyd'",
-    "name *= 'VLC'",
-    "name *= 'compton'",
-    "name *= 'picom'",
-    "name *= 'Chromium'",
-    "name *= 'Chrome'",
-    "class_g = 'Firefox' && argb",
-    "class_g = 'Conky'",
-    "class_g = 'Kupfer'",
-    "class_g = 'Synapse'",
-    "class_g ?= 'Notify-osd'",
-    "class_g ?= 'Cairo-dock'",
-    "class_g ?= 'Xfce4-notifyd'",
-    "class_g ?= 'Xfce4-power-manager'",
-    "_GTK_FRAME_EXTENTS@:c",
-    "_NET_WM_STATE@:32a *= '_NET_WM_STATE_HIDDEN'"
-];
-# Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners)
-shadow-ignore-shaped = false;
-
-#################################
-#
-# Opacity
-#
-#################################
-
-inactive-opacity = 1;
-active-opacity = 1;
-frame-opacity = 1;
-inactive-opacity-override = false;
-
-# Dim inactive windows. (0.0 - 1.0)
-# inactive-dim = 0.2;
-# Do not let dimness adjust based on window opacity.
-# inactive-dim-fixed = true;
-# Blur background of transparent windows. Bad performance with X Render backend. GLX backend is preferred.
-# blur-background = true;
-# Blur background of opaque windows with transparent frames as well.
-# blur-background-frame = true;
-# Do not let blur radius adjust based on window opacity.
-blur-background-fixed = false;
-blur-background-exclude = [
-    "window_type = 'dock'",
-    "window_type = 'desktop'"
+  "name = 'Notification'",
+  "class_g = 'Conky'",
+  "class_g ?= 'Notify-osd'",
+  "class_g = 'Cairo-clock'",
+  "_GTK_FRAME_EXTENTS@:c"
 ];
 
+# Specify a X geometry that describes the region in which shadow should not
+# be painted in, such as a dock window region. Use
+#    shadow-exclude-reg = "x10+0+0"
+# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
+#
+# shadow-exclude-reg = ""
+
+# Crop shadow of a window fully on a particular Xinerama screen to the screen.
+# xinerama-shadow-crop = false
+
+
 #################################
-#
-# Fading
-#
+#           Fading              #
 #################################
 
-# Fade windows during opacity changes.
+
+# Fade windows in/out when opening/closing and when opacity changes,
+#  unless no-fading-openclose is used.
+# fading = false
 fading = true;
-# The time between steps in a fade in milliseconds. (default 10).
-fade-delta = 4;
-# Opacity change between steps while fading in. (default 0.028).
+
+# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
+# fade-in-step = 0.028
 fade-in-step = 0.03;
-# Opacity change between steps while fading out. (default 0.03).
+
+# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
+# fade-out-step = 0.03
 fade-out-step = 0.03;
-# Fade windows in/out when opening/closing
-# no-fading-openclose = true;
+
+# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
+# fade-delta = 10
 
 # Specify a list of conditions of windows that should not be faded.
-fade-exclude = [ ];
+# fade-exclude = []
+
+# Do not fade on window open/close.
+# no-fading-openclose = false
+
+# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
+# no-fading-destroyed-argb = false
+
 
 #################################
-#
-# Other
-#
+#   Transparency / Opacity      #
 #################################
 
-# Try to detect WM windows and mark them as active.
-mark-wmwin-focused = true;
-# Mark all non-WM but override-redirect windows active (e.g. menus).
-mark-ovredir-focused = true;
-# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events.
-# Usually more reliable but depends on a EWMH-compliant WM.
-use-ewmh-active-win = true;
-# Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on.
-detect-rounded-corners = true;
 
-# Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows.
-# This prevents opacity being ignored for some apps.
-# For example without this enabled my xfce4-notifyd is 100% opacity no matter what.
-detect-client-opacity = true;
+# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
+# inactive-opacity = 1
+inactive-opacity = 0.8;
 
-# Specify refresh rate of the screen.
-# If not specified or 0, picom will try detecting this with X RandR extension.
-refresh-rate = 0;
+# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
+# frame-opacity = 1.0
+frame-opacity = 0.7;
 
-# Vertical synchronization: match the refresh rate of the monitor
-vsync = true;
+# Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows.
+# inactive-opacity-override = true
+inactive-opacity-override = false;
 
-# Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing.
-# Reported to have no effect, though.
-dbe = false;
+# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
+# active-opacity = 1.0
 
-# Limit picom to repaint at most once every 1 / refresh_rate second to boost performance.
-# This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already,
-# unless you wish to specify a lower refresh rate than the actual value.
-#sw-opti = true;
-
-# Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games.
-# Known to cause flickering when redirecting/unredirecting windows.
-unredir-if-possible = false;
+# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
+# inactive-dim = 0.0
 
 # Specify a list of conditions of windows that should always be considered focused.
-focus-exclude = [ ];
+# focus-exclude = []
+focus-exclude = [ "class_g = 'Cairo-clock'" ];
 
-# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time.
+# Use fixed inactive dim value, instead of adjusting according to window opacity.
+# inactive-dim-fixed = 1.0
+
+# Specify a list of opacity rules, in the format `PERCENT:PATTERN`,
+# like `50:name *= "Firefox"`. picom-trans is recommended over this.
+# Note we don't make any guarantee about possible conflicts with other
+# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
+# example:
+#    opacity-rule = [ "80:class_g = 'URxvt'" ];
+#
+# opacity-rule = []
+
+
+#################################
+#     Background-Blurring       #
+#################################
+
+
+# Parameters for background blurring, see the *BLUR* section for more information.
+# blur-method =
+# blur-size = 12
+#
+# blur-deviation = false
+#
+# blur-strength = 5
+
+# Blur background of semi-transparent / ARGB windows.
+# Bad in performance, with driver-dependent behavior.
+# The name of the switch may change without prior notifications.
+#
+# blur-background = false
+
+# Blur background of windows when the window frame is not opaque.
+# Implies:
+#    blur-background
+# Bad in performance, with driver-dependent behavior. The name may change.
+#
+# blur-background-frame = false
+
+
+# Use fixed blur strength rather than adjusting according to window opacity.
+# blur-background-fixed = false
+
+
+# Specify the blur convolution kernel, with the following format:
+# example:
+#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
+#
+# blur-kern = ""
+blur-kern = "3x3box";
+
+
+# Exclude conditions for background blur.
+# blur-background-exclude = []
+blur-background-exclude = [
+  "window_type = 'dock'",
+  "window_type = 'desktop'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+#################################
+#       General Settings        #
+#################################
+
+# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
+# daemon = false
+
+# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
+# `xrender` is the default one.
+#
+# backend = "glx"
+backend = "xrender";
+
+# Enable/disable VSync.
+# vsync = false
+vsync = true;
+
+# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
+# dbus = false
+
+# Try to detect WM windows (a non-override-redirect window with no
+# child that has 'WM_STATE') and mark them as active.
+#
+# mark-wmwin-focused = false
+mark-wmwin-focused = true;
+
+# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
+# mark-ovredir-focused = false
+mark-ovredir-focused = true;
+
+# Try to detect windows with rounded corners and don't consider them
+# shaped windows. The accuracy is not very high, unfortunately.
+#
+# detect-rounded-corners = false
+detect-rounded-corners = true;
+
+# Detect '_NET_WM_OPACITY' on client windows, useful for window managers
+# not passing '_NET_WM_OPACITY' of client windows to frame windows.
+#
+# detect-client-opacity = false
+detect-client-opacity = true;
+
+# Specify refresh rate of the screen. If not specified or 0, picom will
+# try detecting this with X RandR extension.
+#
+# refresh-rate = 60
+refresh-rate = 0;
+
+# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window,
+# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy,
+# provided that the WM supports it.
+#
+# use-ewmh-active-win = false
+
+# Unredirect all windows if a full-screen opaque window is detected,
+# to maximize performance for full-screen windows. Known to cause flickering
+# when redirecting/unredirecting windows.
+#
+# unredir-if-possible = false
+
+# Delay before unredirecting the window, in milliseconds. Defaults to 0.
+# unredir-if-possible-delay = 0
+
+# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
+# unredir-if-possible-exclude = []
+
+# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows
+# in the same group focused at the same time.
+#
+# detect-transient = false
 detect-transient = true;
-# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time.
-# WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too.
+
+# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same
+# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if
+# detect-transient is enabled, too.
+#
+# detect-client-leader = false
 detect-client-leader = true;
 
-#################################
+# Resize damaged region by a specific number of pixels.
+# A positive value enlarges it while a negative one shrinks it.
+# If the value is positive, those additional pixels will not be actually painted
+# to screen, only used in blur calculation, and such. (Due to technical limitations,
+# with use-damage, those pixels will still be incorrectly painted to screen.)
+# Primarily used to fix the line corruption issues of blur,
+# in which case you should use the blur radius value here
+# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`,
+# with a 5x5 one you use `--resize-damage 2`, and so on).
+# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
 #
+# resize-damage = 1
+
+# Specify a list of conditions of windows that should be painted with inverted color.
+# Resource-hogging, and is not well tested.
+#
+# invert-color-include = []
+
+# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer.
+# Might cause incorrect opacity when rendering transparent content (but never
+# practically happened) and may not work with blur-background.
+# My tests show a 15% performance boost. Recommended.
+#
+# glx-no-stencil = false
+
+# GLX backend: Avoid rebinding pixmap on window damage.
+# Probably could improve performance on rapid window content changes,
+# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
+# Recommended if it works.
+#
+# glx-no-rebind-pixmap = false
+
+# Disable the use of damage information.
+# This cause the whole screen to be redrawn everytime, instead of the part of the screen
+# has actually changed. Potentially degrades the performance, but might fix some artifacts.
+# The opposing option is use-damage
+#
+# no-use-damage = false
+use-damage = true;
+
+# Use X Sync fence to sync clients' draw calls, to make sure all draw
+# calls are finished before picom starts drawing. Needed on nvidia-drivers
+# with GLX backend for some users.
+#
+# xrender-sync-fence = false
+
+# GLX backend: Use specified GLSL fragment shader for rendering window contents.
+# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl`
+# in the source tree for examples.
+#
+# glx-fshader-win = ""
+
+# Force all windows to be painted with blending. Useful if you
+# have a glx-fshader-win that could turn opaque pixels transparent.
+#
+# force-win-blend = false
+
+# Do not use EWMH to detect fullscreen windows.
+# Reverts to checking if a window is fullscreen based only on its size and coordinates.
+#
+# no-ewmh-fullscreen = false
+
+# Dimming bright windows so their brightness doesn't exceed this set value.
+# Brightness of a window is estimated by averaging all pixels in the window,
+# so this could comes with a performance hit.
+# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
+#
+# max-brightness = 1.0
+
+# Make transparent windows clip other windows like non-transparent windows do,
+# instead of blending on top of them.
+#
+# transparent-clipping = false
+
+# Set the log level. Possible values are:
+#  "trace", "debug", "info", "warn", "error"
+# in increasing level of importance. Case doesn't matter.
+# If using the "TRACE" log level, it's better to log into a file
+# using *--log-file*, since it can generate a huge stream of logs.
+#
+# log-level = "debug"
+log-level = "warn";
+
+# Set the log file.
+# If *--log-file* is never specified, logs will be written to stderr.
+# Otherwise, logs will to written to the given file, though some of the early
+# logs might still be written to the stderr.
+# When setting this option from the config file, it is recommended to use an absolute path.
+#
+# log-file = "/path/to/your/log/file"
+
+# Show all X errors (for debugging)
+# show-all-xerrors = false
+
+# Write process ID to a file.
+# write-pid-path = "/path/to/your/log/file"
+
 # Window type settings
 #
-#################################
-
+# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard:
+#     "unknown", "desktop", "dock", "toolbar", "menu", "utility",
+#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu",
+#     "tooltip", "notification", "combo", and "dnd".
+#
+# Following per window-type options are available: ::
+#
+#   fade, shadow:::
+#     Controls window-type-specific shadow and fade settings.
+#
+#   opacity:::
+#     Controls default opacity of the window type.
+#
+#   focus:::
+#     Controls whether the window of this type is to be always considered focused.
+#     (By default, all window types except "normal" and "dialog" has this on.)
+#
+#   full-shadow:::
+#     Controls whether shadow is drawn under the parts of the window that you
+#     normally won't be able to see. Useful when the window has parts of it
+#     transparent, and you want shadows in those areas.
+#
+#   redir-ignore:::
+#     Controls whether this type of windows should cause screen to become
+#     redirected again after been unredirected. If you have unredir-if-possible
+#     set, and doesn't want certain window to cause unnecessary screen redirection,
+#     you can set this to `true`.
+#
 wintypes:
 {
-    tooltip =
-    {
-        # fade: Fade the particular type of windows.
-        fade = true;
-        # shadow: Give those windows shadow
-        shadow = false;
-        # opacity: Default opacity for the type of windows.
-        opacity = 0.85;
-        # focus: Whether to always consider windows of this type focused.
-        focus = true;
-    };
+  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
+  dock = { shadow = false; }
+  dnd = { shadow = false; }
+  popup_menu = { opacity = 0.8; }
+  dropdown_menu = { opacity = 0.8; }
 };
-
-######################
-#
-# XSync
-# See: https://github.com/yshui/picom/commit/b18d46bcbdc35a3b5620d817dd46fbc76485c20d
-#
-######################
-
-# Use X Sync fence to sync clients' draw calls. Needed on nvidia-drivers with GLX backend for some users.
-xrender-sync-fence = true;
-
-opacity-rule = [
-  "100:name *= 'zoom'",
-];